Choosing a tractor for orchards and greenhouses

Work in specialized environments

Orchards and greenhouses require careful review of row spacing, low clearances and working dimensions. Start with the actual working environment, then review the tractor and implements together.

Working width

Start with the narrowest part of your working environment. Measure between rows and at gates, then allow space for the tractor, tires and implement.

A tractor that fits through an entrance may still need additional room while cultivating or turning. Review the complete working combination.

Height clearance

Check the lowest branch, greenhouse support and doorway. Include the selected cab or rollover protection structure when reviewing overall height.

Use the catalogue dimensions as a starting point, then confirm the configuration for the model you intend to order.

Implements

Share the implement model and its technical requirements. Review working width, PTO speed, power, linkage and hydraulic connections together.

• Required PTO speed and power
• Rear linkage and lift requirement
• Hydraulic outlets and working width

Model selection

DONOL’s catalogue includes DN504-G, DN504-GC and DN704-GC compact orchard and greenhouse models. DN504-G is listed at 50 HP with a 1535 mm wheelbase. DN504-GC is 50 HP with a 1250 mm wheelbase. DN704-GC is 70 HP with a 1350 mm wheelbase.

Review each model’s complete specifications and confirm the tires and working dimensions for your application.

Inquiry checklist

A clear inquiry helps DONOL review the right model and configuration.

• Application, row spacing and access dimensions
• Implement specifications and preferred tractor model
• Destination and required configuration